OrcaSlicer-bambulab

Fill

Fixed some instance of simplify_polygons() invocation.

2017-03-22 15:35:09 +01:00

Format

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

GCode

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

BoundingBox.cpp

BoundingBox, Print - methods inlined, added const accessors.

2017-03-13 16:03:11 +01:00

BoundingBox.hpp

BoundingBox, Print - methods inlined, added const accessors.

2017-03-13 16:03:11 +01:00

BridgeDetector.cpp

Some beautification and C++11 adaptation.

2017-03-28 13:25:10 +02:00

BridgeDetector.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

ClipperUtils.cpp

Fix of https://github.com/prusa3d/Slic3r/issues/214

2017-04-04 11:17:25 +02:00

ClipperUtils.hpp

Bugfix: when the Voronoi diagram contained very large coordinates we need to check whether they are greater than our allowed range and consider the Voronoi edges infinite in those cases, in order to prevent overflows.

2017-03-24 09:32:30 +01:00

Config.cpp

…

Config.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

EdgeGrid.cpp

Use Vertex Buffer Objects for rendering of 3D volumes if possible.

2017-03-16 14:02:28 +01:00

EdgeGrid.hpp

Use Vertex Buffer Objects for rendering of 3D volumes if possible.

2017-03-16 14:02:28 +01:00

ExPolygon.cpp

Adapted BoundingBox get_extents(const ExPolygons &expolygons)

2017-04-05 09:52:06 +02:00

ExPolygon.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

ExPolygonCollection.cpp

Reworked the bridge detector to allow searching a single bridging

2016-11-08 09:59:25 +01:00

ExPolygonCollection.hpp

…

Extruder.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

Extruder.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

ExtrusionEntity.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

ExtrusionEntity.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

ExtrusionEntityCollection.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

ExtrusionEntityCollection.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

ExtrusionSimulator.cpp

Fixes after the merge of changes by @alexrj.

2016-12-08 19:02:16 +01:00

ExtrusionSimulator.hpp

Fixes after the merge of changes by @alexrj.

2016-12-08 19:02:16 +01:00

Flow.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

Flow.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

GCode.cpp

Improved G-code generator for multi-material prints

2017-05-10 11:25:57 +02:00

GCode.hpp

Improved G-code generator for multi-material prints

2017-05-10 11:25:57 +02:00

GCodeReader.cpp

Removed a broken Arc Fitting feature.

2017-04-26 14:24:31 +02:00

GCodeReader.hpp

Removed a broken Arc Fitting feature.

2017-04-26 14:24:31 +02:00

GCodeSender.cpp

…

GCodeSender.hpp

…

GCodeTimeEstimator.cpp

Removed a broken Arc Fitting feature.

2017-04-26 14:24:31 +02:00

GCodeTimeEstimator.hpp

Removed a broken Arc Fitting feature.

2017-04-26 14:24:31 +02:00

GCodeWriter.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

GCodeWriter.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

Geometry.cpp

Bugfix: when the Voronoi diagram contained very large coordinates we need to check whether they are greater than our allowed range and consider the Voronoi edges infinite in those cases, in order to prevent overflows.

2017-03-24 09:32:30 +01:00

Geometry.hpp

Fixed some instance of simplify_polygons() invocation.

2017-03-22 15:35:09 +01:00

Layer.cpp

C++11 beautification of loops.

2017-04-05 08:59:03 +02:00

Layer.hpp

Merged support_fills with support_interface_fills.

2017-04-07 17:37:30 +02:00

LayerRegion.cpp

Parallelize PrintObject::process_external_surfaces()

2017-03-07 17:43:43 +01:00

libslic3r.h

Performance improvements of the MotionPlanner

2017-05-05 09:59:56 +02:00

Line.cpp

…

Line.hpp

Don't be lazy, use fully qualified Slic3r::Polygon/ExPolygon/Point/Line names

2016-12-08 15:16:09 +01:00

Model.cpp

Some utility methods to help loading models from the disk.

2017-02-26 22:03:03 +01:00

Model.hpp

Some utility methods to help loading models from the disk.

2017-02-26 22:03:03 +01:00

MotionPlanner.cpp

Performance improvements of the MotionPlanner

2017-05-05 09:59:56 +02:00

MotionPlanner.hpp

Performance improvements of the MotionPlanner

2017-05-05 09:59:56 +02:00

MultiPoint.cpp

Move semantics on MultiPoint, Polygon, Polyline.

2017-01-19 13:43:29 +01:00

MultiPoint.hpp

Improvement of the move semantics on various objects:

2017-01-20 14:39:44 +01:00

MutablePriorityQueue.hpp

Performance improvements of the MotionPlanner

2017-05-05 09:59:56 +02:00

PerimeterGenerator.cpp

Merged support_fills with support_interface_fills.

2017-04-07 17:37:30 +02:00

PerimeterGenerator.hpp

Reverted the perimeter generator to not save the perimeter areas.

2016-11-17 23:22:59 +01:00

PlaceholderParser.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

PlaceholderParser.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

Point.cpp

Performance improvements of the MotionPlanner

2017-05-05 09:59:56 +02:00

Point.hpp

Improved G-code generator for multi-material prints

2017-05-10 11:25:57 +02:00

Polygon.cpp

Adapted to the new ClipperUtils.hpp interface by @alexrj

2016-12-13 19:22:23 +01:00

Polygon.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

Polyline.cpp

new function remove_degenerate(Polylines ...)

2017-01-25 18:23:57 +01:00

Polyline.hpp

Created a total_lengt() free function for Polygons and Polylines.

2017-02-02 16:03:32 +01:00

PolylineCollection.cpp

Copy and move variants of chained_path functions

2016-11-02 22:31:03 +02:00

PolylineCollection.hpp

Copy and move variants of chained_path functions

2016-11-02 22:31:03 +02:00

Print.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

Print.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

PrintConfig.cpp

Added Notes Tab to Printer Settings #210

2017-05-05 11:59:51 +02:00

PrintConfig.hpp

Added Notes Tab to Printer Settings #210

2017-05-05 11:59:51 +02:00

PrintObject.cpp

Provision for disabling TBB parallelization for debugging purposes.

2017-04-05 09:53:24 +02:00

PrintRegion.cpp

Some beautification and C++11 adaptation.

2017-03-28 13:25:10 +02:00

Slicing.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

Slicing.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

SlicingAdaptive.cpp

Fix compilation on Linux.

2016-12-12 18:59:35 +01:00

SlicingAdaptive.hpp

Support for user definable variable layer thickness, the C++ backend.

2016-12-12 17:53:38 +01:00

SupportMaterial.cpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

SupportMaterial.hpp

Finalized the experimental "synchronize support layers with object layers"

2017-04-10 12:00:07 +02:00

Surface.cpp

…

Surface.hpp

C++ compiler suppressed default constructor and assignment operator

2017-03-08 14:22:49 +01:00

SurfaceCollection.cpp

New supports now do rafts at least to the extent the test cases run through.

2016-12-20 12:19:13 +01:00

SurfaceCollection.hpp

Ported the G-code generator from Perl to C++.

2017-05-03 18:28:22 +02:00

SVG.cpp

Utility function SVG::export_expolygons() to paint a set of possibly

2017-03-02 16:32:43 +01:00

SVG.hpp

Utility function SVG::export_expolygons() to paint a set of possibly

2017-03-02 16:32:43 +01:00

TriangleMesh.cpp

Debugging output and asserts for TriangleMeshSlicer::slice().

2017-04-05 08:57:37 +02:00

TriangleMesh.hpp

Added dependencies on the Intel Thread Building Blocks.

2017-03-07 13:03:14 +01:00

utils.cpp

Set boost tracing level on DLL initialization to errors only.

2017-03-03 14:38:25 +01:00

Utils.hpp

Rewrote next_highest_power_of_2 as a template as OSX had issues with

2017-03-28 18:02:26 +02:00