Alessandro Ranellucci 52c9897eda New --extrusion-axis option; removed --no-extrusion

2011-12-01 22:34:21 +01:00

..

ExtrusionPath

…

Fill

Bugfix: error when concentric infill. #73

2011-11-28 22:52:35 +01:00

Geometry

Bugfix: sometimes holes were detected as contours

2011-12-01 20:57:38 +01:00

GUI

New --extrusion-axis option; removed --no-extrusion

2011-12-01 22:34:21 +01:00

Polyline

…

TriangleMesh

Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16

2011-11-30 16:07:31 +01:00

Config.pm

New --extrusion-axis option; removed --no-extrusion

2011-12-01 22:34:21 +01:00

ExPolygon.pm

Bugfix: Clipper error occurred under certain circumstances

2011-12-01 19:40:45 +01:00

Extruder.pm

New --extrusion-axis option; removed --no-extrusion

2011-12-01 22:34:21 +01:00

ExtrusionLoop.pm

New --solid-infill-feed-rate option. #68

2011-11-28 19:11:26 +01:00

ExtrusionPath.pm

Bugfix: error when concentric infill. #73

2011-11-28 22:52:35 +01:00

Fill.pm

Bugfix: some bridges were not detected correctly. #57

2011-11-30 20:32:28 +01:00

Geometry.pm

Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16

2011-11-30 16:07:31 +01:00

GUI.pm

…

Layer.pm

Bugfix: sometimes holes were detected as contours

2011-12-01 20:57:38 +01:00

Line.pm

…

Perimeter.pm

New --bridge-feed-rate option. #68

2011-11-28 18:37:53 +01:00

Point.pm

…

Polygon.pm

New bridging logic, more robust. #58

2011-11-19 16:44:24 +01:00

Polyline.pm

New bridging logic, more robust. #58

2011-11-19 16:44:24 +01:00

Print.pm

New --extrusion-axis option; removed --no-extrusion

2011-12-01 22:34:21 +01:00

Skein.pm

Bugfix: some bridges were not detected correctly. #57

2011-11-30 20:32:28 +01:00

STL.pm

Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16

2011-11-30 16:07:31 +01:00

Surface.pm

Bugfix: some bridges were not detected correctly. #57

2011-11-30 20:32:28 +01:00

SVG.pm

Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16

2011-11-30 16:07:31 +01:00

TriangleMesh.pm

Bugfix: some bridges were not detected correctly. #57

2011-11-30 20:32:28 +01:00